Porous
Rainwater drains through, so no puddles and no slippery build-up.
Resin paths and patios
Resin bound patios and garden paths that drain freely, stay put and look good for years.
We build all kinds of patios and paths in resin bound surfacing, in many colours and designs and with beautiful edgings. We guide you through all the choices so your new patio or path becomes a valuable addition to your home.
Resin bound is porous, so a patio never puddles after rain, and the seamless finish means there are no joints for weeds to take hold in. It suits rear gardens, side paths, front paths and steps alike, and it can be combined with porcelain or block paving borders for contrast.
As with our driveways, every resin bound surface we lay is guaranteed for 10 years.
Why choose resin for a patio or path
Seamless
No joints, so nothing for weeds to grow through.
Easy to look after
A sweep and a rinse keeps it looking new.
Any shape
Resin follows curves, steps and awkward corners without cutting.
Our work
Ascot
Resin and Porcelain Project, Ascot
Resin bound surfacing and porcelain paving combined at a home in Ascot.
Twickenham
Converted Church Development, Twickenham
Resin bound surfacing for the entrance and paths of a converted church development.
Frequently asked questions
Straight answers to the questions we hear most about resin bound surfacing.
What is a resin driveway?
Resin bound surfacing is a mix of aggregate stone, such as granite, gravel and quartz, combined with a clear liquid resin. Laid onto a solid base it gives a smooth, strong and durable finish, which is why it suits driveways, paths and patios so well.
What is the difference between resin bound and resin bonded?
With resin bound, the stone and resin are mixed together and trowelled onto the base, giving a smooth, flat, porous surface that lets water drain through. With resin bonded, the resin goes down first and the stone is scattered over the top, giving a rougher, non-permeable surface where stones are more likely to come loose. Permacoat specialises in resin bound surfacing.
Do I need planning permission for a resin driveway?
Usually not for a resin bound driveway, because the surface is permeable and meets sustainable drainage guidance. A non-permeable surface, such as resin bonded, may need planning permission if a front driveway is over five square metres without a soakaway. If you are unsure, especially with a listed building or in a conservation area, it is worth checking first, and we can handle this on your behalf.
Can resin be laid over my existing driveway?
Often, yes. Resin can go over structurally sound, crack-free concrete or tarmac. It cannot go over loose flagstones or block paving, which we remove first to give a solid base.
How soon can I walk or park on a new resin driveway?
You can walk on it after about eight hours and park on it after 24 to 48 hours, depending on the weather and temperature. Using it too soon can cause loose stones, indentations and marks, so we will advise on timings once the job is done.
How long does a resin driveway last?
Installed professionally and looked after, a resin bound driveway should last 15 to 20 years. As a Daltex approved installer, our resin bound work comes with a 10 year guarantee.
How do I look after a resin driveway?
Regular sweeping and a gentle wash is all it needs. Brush off leaves and debris and rinse with a garden hose. A pressure washer is fine at 100 to 150 bar with a wide nozzle, kept at least 200mm from the surface, so the resin binder and stones stay put.
